• EI
  • Scopus
  • 食品科学与工程领域高质量科技期刊分级目录第一方阵T1
  • DOAJ
  • EBSCO
  • 北大核心期刊
  • 中国核心学术期刊RCCSE
  • JST China
  • FSTA
  • 中国精品科技期刊
  • 中国农业核心期刊
  • CA
  • WJCI
  • 中国科技核心期刊CSTPCD
  • 中国生物医学SinoMed
中国精品科技期刊2020
林毅,黄梅,吴桂苹,等. 响应面法优化熏干草果油树脂提取工艺及成分分析[J]. 食品工业科技,2022,43(1):163−171. doi: 10.13386/j.issn1002-0306.2021040002.
引用本文: 林毅,黄梅,吴桂苹,等. 响应面法优化熏干草果油树脂提取工艺及成分分析[J]. 食品工业科技,2022,43(1):163−171. doi: 10.13386/j.issn1002-0306.2021040002.
LIN Yi, HUANG Mei, WU Guiping, et al. Optimization of Extraction Process and Component Analysis of Oleoresin from Smoked Amomum tsaoko by Response Surface Methodology[J]. Science and Technology of Food Industry, 2022, 43(1): 163−171. (in Chinese with English abstract). doi: 10.13386/j.issn1002-0306.2021040002.
Citation: LIN Yi, HUANG Mei, WU Guiping, et al. Optimization of Extraction Process and Component Analysis of Oleoresin from Smoked Amomum tsaoko by Response Surface Methodology[J]. Science and Technology of Food Industry, 2022, 43(1): 163−171. (in Chinese with English abstract). doi: 10.13386/j.issn1002-0306.2021040002.

响应面法优化熏干草果油树脂提取工艺及成分分析

Optimization of Extraction Process and Component Analysis of Oleoresin from Smoked Amomum tsaoko by Response Surface Methodology

  • 摘要: 为获得熏干草果(SDAT)油树脂提取的最佳工艺条件,以提取溶剂、提取温度、料液比、提取时间和细度为影响因素,在单因素实验的基础上,应用Box-Benhnken方法进行三因素三水平的实验设计,以SDAT油树脂提取得率为响应值,运用响应面法(RSM)对提取条件进行进一步的优化。并采用GC-TOF-MS对SDAT油树脂成分进行检测分析。结果表明,SDAT油树脂的最佳工艺条件为:提取温度75 ℃,料液比1:20(g/mL),提取时间7 h。回归方程预测SDAT油树脂得率理论值可达9.57%,3次验证实验的平均得率为9.48%,预测值与实际结果接近。采用GC-TOF-MS对SDAT油树脂成分进行检测分析,鉴定出化合物成分有58种,分别是醇类(31.59%)、醛类(21.13%)、烯类(1.23%)、酮类(1.56%)、酯类(2.38%)、酚类(0.79%),主要化合物有1,8桉叶醇(9.28%)、α-萜品醇(3.55%)、香叶醇(8.4%)、反式柠檬醛(5.78%)、2-甲基-3-苯基丙醛(6.33%)等。通过SDAT油树脂最佳工艺的确定,检测出的成分主要集中在醇类和醛类,这为后期草果油树脂的营养成分以及生物活性提供理论依据。

     

    Abstract: In order to obtain the best extraction process of smoked Amomum tsaoko(SDAT) oleoresin, the extraction solvent, extraction temperature, solid-liquid ratio, extraction time and particle size were regarded as the influence factors. On the basis of single factor experiment, the eexperimental design of three factors and three levels was used by Box-Benhnken central composite method, according to the extraction rate of SDAT oleoresin as the response value, and the extraction conditions were further optimized by response surface methodology(RSM). The results showed that the optimum process conditions of SDAT oleoresin was as follows: Anhydrous methanol as solvent, extraction temperature was 75 ℃, solid-liquidratio was 1:20(g/mL), extraction time was 7 h and particle size was 80 mesh. The regression equation predicted that the theoretical extraction rate of SDAT could reach 9.57%, the average extraction rate of the three validation experiments was 9.48%, and the predicted value was close to the actual result. And 58 compounds were identified by GC-TOF-MS, including alcohols(31.59%), aldehydes(21.13%), alkenes(1.23%), ketones(1.56%), esters(2.38%) and phenols(0.79%), 1,8-eucalyptol(9.28%), α-terpineol(3.55%), gera-niol(8.4%), trans citral(5.78%), 2-methyl-3-ph-enylpropanal(6.33%), etc. Through the determination of the best process of SDAT oleoresin, the detected components are mainly concentrated in alcohols and aldehydes, which provides a theoretical basis for the nutritional components and biological activity of grass fruit oleoresin in the later stage.

     

/

返回文章
返回